Hi-Spec 5 Piece 2000W Electric Hot Air Heat Gun with Nozzles Set

◆ THE HEAT IS ON: For when only a good blast of concentrated heat will do, the Hi-Spec 2000W Hot Air Heat Gun makes it DIY simple. Burn and Strip off paint, resins, vinyl flooring, body fillers. Scrap off stubborn wallpaper, adhesives, labels, stickers and decals. De-ice/thaw frozen metal pipes and much more

◆ MORE THAN HOT AIR: With four detachable nozzles and dual temperatures, get going on all projects. Heat shrink wrap insulation tubes and hoses. Loosen rusted nuts and bolts. Dry damp wood and plaster wall patches. Cure paint and adhesives. Heat tar, bitumen and waxes. Bend and join PVC parts. Even light BBQ coals and caramelize sauces!

◆ TAKE THE HEAT OFF: Sit the gun upright on its rear flat base for a no-hands operation eg. wire sheath heat-shrinking or for safe cooling down. Housed in a heat-resistant shell, the large handle has a front guard and a non-slip back for easy control even when wearing work gloves, and a shield surrounds the hot exhaust port to prevent accidental contact

◆ IT'S A HOT ITEM: With no complicated controls, simply push the big switch to turn on and select the two core temperatures of 350 and 550°C (662 and 1022 °F), with airflow being automatically adjusted by a built-in high-speed fan. Connected by a 1.8m/6ft power cord and with a lightweight of just under 600g, get a balance of thermal power for general purpose DIY

◆ GIVE IT A BLAST: The 4 nozzles are push-on/pull-off and nickel-plated for rust-resistance with shapes that target heat flow: Concentrator/Cone - localised spot areas; Flat-tip Concentrator - a wide and flat pattern for hard area scraping; Wide-Area Deflector/Scraper - a much broader area; Narrow-Area Deflector/Scraper - adjacent areas are protected