Hi-Spec 18V Cordless DIY Drill Driver with 800mAh Battery

FULL BIT SET & DRILL DRIVER: For repairs, assembling, decorating, weekend DIY, hobbyists, and craftwork. Be prepared for powered screw-driving, detailed brushing, grinding, and light-duty drilling in soft woods, plastics, soft or non-ferrous thin metals, and light ceramics. Neatly stored in a lightweight storage case

DRILL DRIVER FEATURES: Easily change out accessory bits by simply twisting the 10mm/3/8" chuck end. With a forward and reverse selector, a trigger controls variable speeds from 0 to 550rpm. The 17 step torque selector slip control ring prevents over tightening of screws or over-drilling NB. Not suited for brick, concrete or hardened ferrous metals

800mAh RECHARGEABLE BATTERY: The rechargeable Ni-MH battery charges (charger included) in 3 to 5 hours. This battery provides power for upto 13Nm of forward and reverse turning torque for fast power screw-driving and drilling duties in light or thin materials

SCREWS, NUTS & BOLTS: Supplied are driver insert bits for the most commonly found screwdrivers and fasteners in DIY work: Slotted/Flat, Pozi, Torx, Phillips and Hex. Also included are metric sockets, a socket adaptor, and a bit extender for reaching recesses

GRINDING, BRUSHING & LIGHT DRILLING: Fine Wire Brass Brushes for clearing rust spots, shaped grinding/polishing stones for burrs, detailed milling and shaping. 4 types of drill bits for light drilling duties in woods, plastics, ceramics, and non-ferrous metals. NB. Not suitable for concrete aggregate, brick or heat-treated/hardened metals