Valspar Trade Interior Wall & Ceiling Matt Primer & Undercoat, Tintable, 1L

Apply this primer & undercoat from the Valspar Trade range to interior & exterior surfaces using a brush, roller or spray, to prepare the surface for painting. It takes 1 hour to dry and will cover 10 m² per litre on average.

Suitable for Wood

Surface Preparation - For indoor use only. Do not apply in damp or humid conditions. Apply when the temperature of the surface being painted is above 10°C. Remove old, loose or flaky paint and repair all damaged areas before painting. Lightly sand existing paint and wipe down with a damp cloth to remove dust. The surface must be clean, dry and free of dust and grease.

Instructions for Use - Stir well before use to ensure paint is thoroughly mixed. Purchase enough paint to complete the job. Apply 1–2 coats using a suitable brush, roller or sprayer. Apply liberally, avoiding excessive rolling or brushing, working from dry areas into the paint’s wet edge. Extra coats may be required when making dramatic colour changes. Dries to touch in about 1 hour under normal conditions. Allow 2-4 hours between coats.

Guarantee - Statutory

Features and benefits

Excellent Opacity

High opacity and covering power

Strong adhesion

Reliable build and obliteration

No splatter

Dry to touch in 1 hour

This product has a Valspar Love Your Colour Guarantee

We want you to be satisfied with your colour selection. Not all monitors will display colours the same and paint tins may not show the same colour as your walls do in natural light. We therefore recommend you order a tester pot online or pop in store to pick one up, so you are sure that this is the right colour for you.

We’re unable to offer refunds or to exchange products that have been mixed to your individual requirements. If the product you purchase is faulty, or not as described, we may offer an exchange, refund or repair as appropriate. This does not affect your legal rights.