Non-Contact Electrical Tester 40% SALE with Voltage Sensitivity

You can get this Non-Contact Electrical Tester with Voltage Sensitivity reduced from £14.99 to £8.99

SALE on Voltage Tester

ULTRICS Voltage Tester, 12V-1000V Non-Contact AC Voltage Detector Pen, Adjustable Sensitivity Electric Tester with LED Flashlight, Buzzer Alarm for Live/Null Wire Judgment and Breakpoint Finder

SAFETY FIRST: It will send out multiple alarms through sound and light. When the voltage is detected, the tip will send out a red light and beep. When the higher the sensed voltage is, or the closer it is to the voltage source, it beeps at a higher frequency. At the same time, the screen will be red or green, red means the high voltage and live wire are detected, and green means the low voltage and null wire are detected.

NON-CONTACT: With an NCV inductive probe for AC voltage; Just place the tip near a terminal strip, outlet, or supply cord. When the tip glows red and the pen beeps, you know there's voltage present. The live wire detector can automatically detect the live or neutral wire. Ideal for breakpoint Tests. Handy circuit tester for electricians, and homeowners.

DUAL-RANGE: Detects standard and low voltage (12-1000V AC / 48-1000V AC) for more sensitive and flexible measurements. Press the S button to adjust sensitivity and adapt low range for doorbells, thermostats, irrigation wiring, etc.; The NCV sensor automatically recognizes the voltage and displays it on the bar graph.

SPECIFICATIONS

AC Voltage: 12V-1000V or 48V-1000V

Frequency: 50Hz / 60Hz

Alarm Mode: sound and light alarm

Electric Torch: LED illumination

Low-voltage indicator lamp: Yes

Power source: 2 x 1.5V AAA batteries

Security Level: CE CAT III 1000V/CAT IV 600V

Service Temperature: 0-40°

Storage Temperature: -10-50°

Altitude: <2000m

Size: 150*30*20mm

Auto power off after 3 minutes

Prevent accidental electrical shocks

Inspect electrical circuits for safety

Troubleshoot electrical problems

Small, lightweight, and easy to use

CAUTIONS

Always test the detector on a known live circuit before using it on an unknown circuit

Do not touch the probe of the detector to any live wires or cables

Keep the detector away from your body when it is detecting voltage

Do not use the detector in wet or damp conditions